Sharp SD-SG11 Mode D'emploi page 39

To move the programmed tracks
1
Program the tracks you want to move. (See page 22.)
2
Press the NAME/TOC EDIT button.
3
Within 10 seconds, press the ENTER button.


To cancel the operation, press the NAME/TOC EDIT button.
4
Press the ENTER button again.


Tracks are rearranged.


The programmed tracks will come to the top of the disc.
Note:


If a track is programmed twice or more, the first instruction will precede to the oth-
ers.

To erase one track
1
While in the stop mode, select the track you want to erase by
pressing the or button. Or start playing the track to be
erased, and then press the MD
2
Press the ERASE button.


To cancel the operation, press the MD button.
3
Press the ERASE button for 2 seconds or more.


The track is erased, and the unit is stopped at the beginning of the next track.
Caution:
Once a track has been erased, it cannot be recovered. Check the track number
before erasing it.
Notes:


When a track is erased, the numbers assigned to the tracks following the erased
track will be automatically decreased by one.


When a track is erased, the track name will be erased at the same time.


It is also possible to erase tracks by selecting either menu of "ERASE" or "ALL
ERASE" with the NAME/TOC EDIT button on the remote control.
01/7/9 25-37.fm
SD-SG11
button to enter the pause mode.
E-36
E
F