Direct Play; Repeat Or Random Play - Sharp SD-SG11 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Direct Play

SD-SG11
When in the CD or MD mode, press the direct buttons to select the desired tracks.
To select a track between the 11th and 99th tracks:
Select the track after pressing the
A. For example, to choose 28
1 Press the " 10" button.
2 Press the "2" button.
3 Press the "8" button.
To select a track beyond the 100th track (MD only):
Select the track after pressing the
B. For example, to choose 105
1 Press the " 10" button twice.
2 Press the "1" button.
3 Press the "10/0" button.
4 Press the "5" button.
E-21
10 button.
10 button twice.

Repeat or Random Play

You can select the CD or MD playback mode; "Repeat play", "Random play" and
"Normal play".
1
When in the CD or MD mode, press the PLAY MODE button repeat-
edly to select the playback mode.
2
Press the CD
or MD
button to start playback.
To repeat a programmed sequence:
Perform steps 1 - 5 in the "Programmed Play" section and then select the repeat play-
back.
Notes:

You can select the playback mode by pressing the PLAY MODE button on the
main unit.

During program operation, random play is not possible.

After using repeat play, be sure to press the
play continuously.

The random play will stop automatically when all tracks are played once. (The
same track will not be played back twice.)

In random play, the CD or MiniDisc player will select and play tracks automatically.
(You cannot select the order of the tracks.)
To cancel repeat or random play:
Press the PLAY MODE button repeatedly to select the normal play mode.
01/7/12
15-24.fm
button. Otherwise, the disc(s) will

Publicité

Chapitres

Table des Matières
loading

Table des Matières