General Control - Sharp SD-SG11 Mode D'emploi

General Control

You can select and change to the color you
prefer from 7 different colors.
1 Press the ON/STAND-BY button to turn the power on.
2 Hold the DISPLAY button down for 2 seconds or more.
3 Press the REC LEVEL/CURSOR or
4 Press the ENTER button.
5 Press the REC LEVEL/CURSOR or


You can select the color you like from 7 colors (COLOR 1 to COLOR 7).
6 Press the ENTER button.

To change the display illumination bright-
ness
To dim:
1 Press the ON/STAND-BY button to turn the power on.
2 Hold the DISPLAY button down for 2 seconds or more.
3 Press the REC LEVEL/CURSOR or
4 Press the ENTER button.


The light goes out and characters are dimmed.
To brighten:
1 Hold the DISPLAY button down for 2 seconds or more.
2 Press the ENTER button.
01/7/12 01-14.fm
SD-SG11
button to select "Color Change".
button.
button to select "DIMMER ON?".
E-12
E
F