Troubleshooting Chart - Sharp XL-1200C Mode D'emploi

Troubleshooting Chart

Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
„ General
Symptom
z The clock is not on z Did a power failure occur? Reset the
time. clock. (Refer to page 13.)
z When a button is z Set this unit to the power stand-by
pressed, the unit mode and then turn it back on.
does not respond.
z If the unit still malfunctions, reset it.
(Refer to step 3 under "If trouble oc-
curs" on page 26.)
z No sound is heard. z Is the volume level set to "0"?
z Are the headphones connected?
z Are the speaker wires disconnected?
„ CD player
Symptom
z Playback does not z Is the disc loaded upside down?
start.
z Playback stops in the z Does the disc satisfy the standards?
middle or is not per-
z Is the disc distorted or scratched?
formed properly.
z Playback sounds are z Is the unit located near excessive vi-
skipped, or stopped brations?
in the middle of a
z Is the disc very dirty?
track.
z Has condensation formed inside the
unit?
Possible cause
Possible cause
„ Tuner
Symptom
z Radio makes unusual z Is the unit placed near the TV or com-
noise consecutively. puter?
z Is the FM aerial or AM loop aerial
placed properly? Move the AC power
lead away from the aerial if located
near.
„ Remote control
Symptom
z The remote control z Is the AC power lead of the unit
does not operate. plugged in?
z Is the battery polarity respected?
z Are the batteries dead?
z Is the distance or angle incorrect?
z Does the remote control sensor re-
ceive strong light?
Possible cause
Possible cause
ENGLISH
E-25