Sharp XL-1200C Mode D'emploi page 12

System Connections (continued)
„ Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position
the FM aerial wire in the direction where the strongest signal can be
received.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM and GND terminals.
Position the AM loop aerial for optimum reception. Place the AM
loop aerial on a shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
Notes:
z Placing the aerial on the unit or near the AC power lead may
cause noise pickup. Place the aerial away from the unit for better
reception.
z When static is still heard even after adjusting the position of the
AM loop aerial, try reversing the wire connections.
Installing the AM loop aerial:
< Assembling >
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception.
Consult your dealer.
External
FM aerial
15 m (49 feet)
Earth rod
E-10
ENGLISH
< Attaching to the wall >
Wall Screws (not supplied)
External AM aerial
7.5 m (25 feet)
Notes:
z When an external FM aerial is used, disconnect the supplied FM
aerial wire from the FM 75 OHMS socket.
z When using an external AM aerial, be sure to keep the wire of the
AM loop aerial connected.
„ Subwoofer connection
When a commercially available speaker with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER OUT socket.
„ Connecting the AC power lead
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
Notes:
AM loop aerial
z Unplug the unit if it will not be used for a prolonged period of time.
z Never use a power lead other than the one supplied. Otherwise, a
malfunction or an accident may occur.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
Speaker with a
built-in amplifier