Dörr MVL-77 Notice D'utilisation page 12

Flashing mode:
Press the button (11) or
A- Flashing effect 1
CAUTION:
·
During operation, the housing and LEDs will warm up.
·
Turn off the device after usage by using On/Off/Menu button (10).
·
Let the device cool down completely, before placing it in the storage pouch.
06 | MOUNTING
06.1 Mounting on a tripod
For mounting on a tripod, screw the LED video light onto your tripod either using the ¼ inch tripod mount (05a) at the bottom of the
magnetic screw (05) or with the ¼ inch tripod mount (04a) below the universal hot shoe mount (04). Suitable tripods are optionally
available from DÖRR.
06.2 Attachment to magnetic surfaces
Thanks to the magnetic screw (05) you can attach the LED video light to all magnetic surfaces.
06.3 Mounting on camera/camcorder with hot shoe
To mount the LED video light on a camera or camcorder with a hot shoe, first unscrew the magnetic screw (05). Now you can slide
the universal hot shoe mount (04) into the hot shoe of your camera or camcorder. Tighten the locking screw (03) downwards.
06.4 Mounting on a smartphone
To mount the LED video light on a smartphone, you need an optional smartphone holder with hot shoe, e.g. from DÖRR:
Alu Smartphone holder SH-6580 PRO 1/4" Hot Shoe
Item No. 380433
07 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean
the outer parts of the device. Before cleaning make sure to switch off the device and take off from USB power supply! Store the
device in a dust-free, dry and cool place. This device is not a toy - keep it out of reach of children. Keep away from pets.
12
(09) to select the desired effect (the selected effect is highlighted in white):
B- Flashing effect 2 C- Flashing effect 3 (SOS)
doerr-foto.de