Publicité
Les langues disponibles
Les langues disponibles
02 | PRODUCT DESCRIPTION
·
Super bright Bi-Color LED continuous light for photo and video recordings
·
High-grade aluminium housing with 360° swivel bracket and magnet base with universal hot shoe and ¼ Inch tripod mount
·
For DSLR, DSLM & camcorder with hot shoe mount and smartphones* (*with optional smartphone holder)
·
Brightness and colour temperature adjustable
·
Pre-set light and flashing effects
·
Clear structured OLED display
·
Supplied with USB-C charging cable and storage pouch
03 | NOMENCLATURE
01 LED surface
02 Swivel bracket
03 Locking screw
04 Universal hot shoe mount
04a) ¼ Inch tripod mount
05 Magnetic screw
05a) ¼ Inch tripod mount
06 USB-C charging socket
07 Ventilation slots
04 | FIRST STEPS
CAUTION: Before first use please tear off the protective film from the LED surface (01) !
Charging the internal Li-Polymer battery
Before first use, please fully charge the built-in Li-Po battery. Connect the USB-C plug (12a) of the USB charging cable (12) with the
USB-C charging socket (06) of the video light. Connect to an USB charging source e.g. you PC. While charging the battery status
indicator flashes in the display (08). When battery is fully charged, all 4 bars light up
After charging, remove the USB-C charging cable (12) from the video light and the USB charging source. When the battery is totally
empty, the charging time by PC is about 2 ½ hours.
NOTE: If LED video light is not in use for a long period of time, we recommend charging the battery to about 60% to avoid
deep-discharge of battery.
10
08 OLED display
09 Button
10 On/Off/Menu button
11 Button
12 USB charging cable
12a) USB-C plug
12b) USB-A plug
13 Storage pouch
:
doerr-foto.de
Publicité
