Operation
TIP:
If the engine does not start, place the throt-
tle grip in the "
position and try again.
It is not necessary to use the choke when
starting a warm engine.
5.
After the engine starts, slowly return the
manual starter handle to its original posi-
tion before releasing it.
6.
Slowly return the throttle grip to the fully
closed position.
52
EMU34926
Electric start models (tiller control)
EWM01842
Failure to attach the engine shut-off
Avoid accidentally pulling the cord dur-
" (warm engine)
Starting procedure (cold engine)
1.
TIP:
The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
2.
ZMU02030
WARNING
cord could result in a runaway boat if
operator is ejected. Attach the engine
shut-off cord to a secure place on your
clothing, or your arm or leg while oper-
ating. Do not attach the cord to clothing
that could tear loose. Do not route the
cord where it could become entangled,
preventing it from functioning.
ing normal operation. Loss of engine
power means the loss of most steering
control. Also, without engine power, the
boat could slow rapidly. This could cau-
se people and objects in the boat to be
thrown forward.
Place the gear shift lever in neutral.
Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then install the clip on the other
end of the cord into the engine shut-off
switch.