Redmond RI-C244-E Mode D'emploi page 6

Technical Specifications
Model .................................................RI-С244-E
Power ..........................................2000-2400 W
Voltage ...........................220-240 V, 50/60 Hz
Electrical safety .......................................class I
Control .................................................mechanic
Soleplate coating ................................ceramic
Steam output .....................................50 g/min
Adjustable steam output ...........................yes
Package Includes
Iron .................................................................................................................................................1 pc.
Measuring cup ............................................................................................................................1 pc.
User manual ................................................................................................................................1 pc.
Service booklet ...........................................................................................................................1 pc.
The manufacturer reserves the right to make any modifications to design, packaging,
or technical specifications of the product without prior notice.
Iron parts
A1
1. Water spray.
2. Water tank cap.
3. Steam output control dial enables to adjust steam output depending on fabric, or
to disable steam feature.
4. Water spray button is used to dampen hard-to-iron fabrics.
5. Steam Shot button is used to release a powerful burst of steam during steam
ironing and vertical steaming.
6. Temperature control dial.
7. Swivel power cord prolongs service life and ensures safety and comfort of use.
8. Power cord.
9. Heating indicator lights up to indicate that iron is heating and goes out to indicate
that selected temperature has been reached.
10. 300 ml water tank.
11. Ceramic coating and carefully crafted design of the soleplate ensure even steam
distribution across the entire soleplate.
12. Water tank "Max" fill line (in vertical position).
13. Measuring cup.
6
"ECO" feature (energy saving mode) ......yes
Steam Shot .......................................150 g/min
Vertical steam................................................yes
Anti-drip feature ...........................................yes
Self-clean feature ........................................yes
Anti-calc feature ...........................................yes
Overheat protection ....................................yes
Power cord length .....................................3 m
I. PRIOR TO FIRST USE
Carefully take the appliance and its detachable parts out of the package. Remove all
wrapping material and stickers except for serial number identification sticker.
No serial number identification sticker on the appliance automatically disables the
user's right to aftersales service.
Wipe the base of the appliance with a damp cloth, then let dry. You may notice foreign
smell when first using the appliance, this does not mean its malfunction.
After transportation or storing the appliance at low temperature keep it at room
temperature for at least two hours before plugging in.
II. OPERATING THE IRON
To fill water tank
1. Ensure that the iron is unplugged from the electrical outlet. Turn the temperature
control dial into "Off" position and steam output control dial nto
2. Open the water tank cap and tilt the iron. Using the measuring cup fill the tank
below the "Max" fill line on the housing. Close the water tank.
3. Position the iron vertically.
CAUTION! Do not fill directly from the faucet to prevent water from entering the ap-
pliance or spilling on the power cord.
Use tap water to fill water tank. If you have exceptionally hard water in your area use
half distilled water and half tap water.
To select the temperature
Iron REDMOND RI-C244-E is equipped with a temperature control dial. The dial is
provided with standard symbols of temperature modes and the names of fabrics.
Turn the temperature control dial to align the name of fabric with the cursor on the
housing (refer to "Fabric Ironing Chart"). Heating indicator on the housing will light up
to indicate heating. Once the soleplate reaches the required temperature heating in-
dicator will go out, indicating that the iron is ready to use.
To adjust steam output
A2
Steam output control dial can be in the following positions:
1. Maximum steam output (recommended for steaming heavy fabrics);
2. "ECO" feature (energy saving mode used for delivering optimal steam output in
selected temperature mode while saving energy);
position.