Redmond RI-C244-E Mode D'emploi page 4

Carefully read all instructions before operating the unit and save them for future refer-
ence. By carefully following these instructions you can considerably prolong the service
life of your appliance.
IMPORTANT SAFEGUARDS
• Manufacturer is not responsible for injuries caused
by failure to comply with the safety requirements
and operation rules of the appliance.
• This appliance is intended to be used for nonindus-
trial use in house hold and similar spheres of ap-
plication: staff kitchen areas in shops, offices and
other work ing environments, farm houses, by clients
in hotels, motels and other residential envi ronments.
Industrial application or any other misuse will be
regarded as violation of proper service conditions.
Should this happen, manufacturer is not responsible
for possible consequences.
• Before plugging in the appliance ensure that the
circuit voltage matches operating voltage of the
appliance (see technical specifications or manufac-
turer' s plate on the appliance).
4
• Use an extension cord designed for power consump-
tion of the appliance as the parameter mismatch
may result in a short circuit or fire outbreak.
• Use only earthed electric sockets as this is an ob-
ligatory safety requirement. Use an earthed exten-
sion cord as well.
• Unplug the appliance after use, while cleaning or
moving. Remove the power cord with dry hands
holding it by the plug, not cord.
• The appliance should not be remained unattended
until it unplugged.
• The appliance should be unplugged when filling
water tank.
CAUTION! The appliance is heated during op-
eration! Do not touch soleplate during and
immediately after its operation. Use special
ironing surface. Do not leave the plugged in
appliance unattended, unplug it immediately
after use.