Before First Use; Assembly Of The Cordless Sweeper - SilverCrest SABD 3.7 LI C2 Mode D'emploi

WARNING! RISK OF INJURY!
This product contains rechargeable batteries. Do not throw the batteries
►
into a fire and do not subject them to high temperatures. There is a
risk of explosion!
Do not use the appliance as a toy.
►
Never leave children unsupervised in the vicinity of the appliance!
►
ATTENTION! PROPERTY DAMAGE!
Only charge the appliance with the mains adapter/charger supplied
►
(Type GPE003W-053050-2)!
Only this cordless sweeper may be charged with the supplied battery
►
charger; the charger is not suitable for other batteries.
Never attempt to recharge non-rechargeable batteries.
►
Before first use
■ Remove the packaging material from the appli-
ance including the plastic cap
guards the on/off switch
pressure during transport.

Assembly of the cordless sweeper

■ Attach the handle
–
Fit the 3 handle elements
pushing the push-in connection into the
handle. Press the knob
connection inwards and push it into the
handle so that the head
the recess on the handle
elements are now firmly fixed together
(see Figure B on the foldout page).
–
Push the assembled handle
in connection into the holder
ance and rotate the handle until it engages.
■ Fitting the dirt container
│ GB │ IE │ NI
■ 4
, which safe-
from unintentional
:
together by
on the push-in
engages in
. The handle
with the push-
on the appli-
on the appliance:
SABD 3.7 LI C2