Before First Use; Assembly Of The Cordless Sweeper - SilverCrest SABD 3.7 LI D4 Mode D'emploi

WARNING! RISK OF INJURY!
This product contains rechargeable batteries . Do not throw the
►
batteries into a fire and do not subject them to high temperatures .
There is a risk of explosion!
Do not use the appliance as a toy .
►
Never leave children unsupervised in the vicinity of the appliance!
►
ATTENTION! PROPERTY DAMAGE!
Only charge the appliance with the mains adapter/charger supplied
►
(Type SEU006A-053055)!
The batteries in this appliance cannot be replaced .Only this cordless
►
sweeper may be charged with the supplied
battery charger; the charger is not suitable for other batteries .
Never attempt to recharge non-rechargeable batteries .
►

Before first use

■ Remove the packaging material from the
appliance including the plastic cap
safeguards the on/off switch
unintentional pressure during transport .

Assembly of the cordless sweeper

■ Attach the handle
2
–
Fit the 3 handle elements
pushing the push-in connection into the
handle . Press the knob
2
connection inwards and push it into the
handle so that the head
2
the recess on the handle
elements are now firmly fixed together
2
(see Figure B on the foldout page) .
–
Push the assembled handle
push-in connection into the holder
appliance and rotate the handle
engages .
■ Fitting the dirt container
–
Push the dirt container
with a slight tilting movement . Ensure that the
dirt container
0
connection .
q
■ 4 │ GB │ IE
, which
8
from
6
:
together by
2
on the push-in
4
engages in
4
The handle
5 .
with the
2
on the
3
until it
2
on the appliance:
0
into the appliance
0
engages in the push-in
SABD 3.7 LI D4