Temperature Control; Getting Started - Klarstein VINESSE Mode D'emploi

TEMPERATURE CONTROL

It is recommended you install the Wine Chiller in a place where the ambient temperature
is between 23-25 °C. If the ambient temperature is above or below recommended
temperatures, the perfor- mance of the unit may be affected. For example, placing your
unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The
temperature range may not be reached.
Temperature Ranges For Your Wine Cooler
Upper Zone (6 bottles)
Bottom Zone (12 bottles)

GETTING STARTED

Setting the Tenperature Control
• Press the LIGHT button to turn the interior light on or off. The light turns off
automatically after 10 minutes. To turn it back on, press the light button again.
• Press and hold the °F/°C button for 2 seconds to change from Celsius to
Fahrenheit.
• The unit is equipped with an automatic key lock that is automatically activated
20 seconds after the last key press. To unlock the keys, press and hold
2 seconds until a beep sounds.
• Briefly press the button once to set the upper zone temperature.
• Briefly press the button twice to set the lower zone temperature.
• Use the ARROW KEYS to set the desired temperature. Each time the button is
pressed, the temperature will increase/decrease by 1 °C.
8-18 °C (ambient temperature 25 °C)
12-18 °C (ambient temperature 25 °C)
for
EN
19