Replacing The Oven Lamp - BORETTI CFBI901AN Prescriptions De Montage Et Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

REPLACING THE OVEN LAMP

WARNING: Ensure the appliance is switched off and disconnected from the electrical
power supply before replacing the lamp to avoid the possibility of electric shock.
Let the oven cavity and the heating elements to cool down.
Switch off the electrical supply.
Remove the protective cover "A" (fig. 6.9).
Replace the halogen lamp "B" with a new one suitable for high temperatures (300°C)
having the following specifications: 220-240 V, 50/60Hz and same power (check watt
power as stamped in the lamp itself) of the replaced lamp.

IMPORTANT WARNING: Never replace the bulb with bare hands; contamination from
your fingers can cause premature failure. Always use a clean cloth or gloves.
Refit the protective cover.
Note: Oven lamp replacement is not covered by your guarantee.
A
B
WRONG
CORRECT
A
B
Fig. 6.9
193

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cfbi901ixCfbi901owCfbi901zw

Table des Matières