Mounting Of The Wall Bracket - Stiebel Eltron IA Manuel D'utilisation Et Installation

Mounting of the wall bracket

N O T E !
Before installation in the required assembly position,
check that the transmitter and receiver are functioning
properly.
The bracket has to be fixed so that the drill hole does
not touch any electrical lines.
Mounting of the wall bracket
1. Fix the wall bracket so that the drill holes do not touch any
electrical lines!
2. Before mounting in the desired installation position, check that
transmitter and receiver are functioning properly.
3. Fix the bracket to the wall with the enclosed pins and screws.
The upper section of the wall bracket is moveable.
- 2 6 -