Deleting The Transmitter; Deleting Individual Channels / The Complete Transmitter .16 Technical Data - Stiebel Eltron IA Manuel D'utilisation Et Installation

Deleting transmitter/channels / Technical data
Deleting individual channels
1. Press simultaneously:
• Programming button P (on the back)
• STOP button
2. Hold down this button combination for approx. 6 seconds,
until the LED goes out briefly 3x.
Deleting the complete transmitter
1. Press simultaneously:
• Programming button P (on the back)
• ▲ button
• STOP button
• ▼ button
2. Hold down this button combination for approx. 6 seconds,
until the LED goes out briefly 3x.
Technical data
Operating voltage
Battery type
IP Code
Permitted ambient temperature
Radio frequency
Notification number
Dimensions in mm (remote control)
Dimensions in mm (wall bracket)
3 V DC
2 x LR 06 (AA)
IP 20
10 to +55 °C
868.3 MHz
CE 0682
L 120 x W 51 x H 26
L 70 x W 26 x H 26
- 3 4 -