Bartscher 166.116 Mode D'emploi page 27

(LV-IS-CY-MT-HU-PL-GR-GB-IE-CZ-SK-FI-LT-BG-SE-DK-NO-RO-
Model Description
K6ECU05TT Top electric range 2 plates
K6ECU10TT Top electric range 4 plates
Top electric range 4 plates on
K6ECU10FF
electric oven
Top glass ceramic electric
K6EVC05TT
range 2 plates
Top glass ceramic electric
K6EVC10TT
range 4 plates
Glass ceramic electric range
K6EVC10FF
4 plates on electric oven
WARNINGS
General
 Read the instructions carefully before installation, use and maintenance of the appliance.
 The installation has to be performed by qualified personnel following the manufacturer's
instructions given in the provided manual.
 The appliance is only suitable for the preparation and cooking of food in industrial kitchens such
as those used in restaurants, hospitals, company canteens, cooking centres, butcher's shops and
food production firms. Any other type of use is not in accordance with the intended purpose and
could place people and/or objects at risk.
 The appliance is intended to be used EXCLUSIVELY with containers that are suitable for
contact with food and resistant to heat), any other use is not considered appropriate.
 The appliance should only be used by trained personnel and for the use for which it was
designed.
 Due to the nature of the appliance, the temperatures required for cooking may cause various
areas of the panelling, as well as kitchenware, to become hot. This is not a construction defect,
but a physical phenomenon caused by the chemical and physical properties of the materials used
for the construction of the appliances.
 In the event of breakdown or malfunction, switch off the appliance and seek help exclusively
from an authorized technical assistance centre.
 Only use genuine spare parts; otherwise no liability is assumed by the manufacturer.
 The appliance must not be washed with high pressure water sprays and the vents or inlets/outlets
for air, fumes and heat must not be obstructed.
 Before connecting the device make sure that the plate specifications correspond to the electrical
supply.
(Table 1) TECHNICAL FEATURES
EE-SI-HR-TR-NL)
Electric
Dimensions
power (E)
LxPxH [mm]
[kW]
300x600x295
600x600x295
600x600x845
300x600x295
600x600x295
600x600x845 10,2
Pag. 26/45
Tension
Freq.
(F)
(G) [Hz]
[V]
4 400 3N 50/60
8 400 3N 50/60
11 400 3N 50/60
3.6 230 1N 50/60
7,2 400 3N 50/60
400 3N 50/60
Cable Electric
Oven E.
type H07 round plate
5,4
RN-F 2,6 kW
kW [N°]
[mm2] [N°]
5x1 - 2
5x2,5 - 4
5x4 1 4
3x2,5 - -
5x2,5 - -
5x4 1 -
Heater
1,8 kW
[N°]
-
-
-
2
4
4