Klarstein LUCA Mode D'emploi page 28

EN
28
3) Using the Grinder
• Do not run the appliance for more than 30 seconds at a time, otherwise the motor
may overheat. Allow the appliance to cool down for at least 30 minutes after use.
• Use the grinder for milling coffee beans, Almond so on similar food.
• It is recommended to use the pulse control .
• Follow the steps shown in the figure below to assemble the appliance.
• In step 1, make sure that the silicone ring is correctly inserted into the grinder cup.
Then, in step 2, screw in the blade base.
• Make sure that the grinder cup is properly secured in step 4, otherwise the
appliance will not operate.
• After use, the appliance can be disassembled again in the opposite order.
• Only take the grinder from the appliance when the blade is completely stopped.
Assembly with the Grinder