Klarstein LUCA Mode D'emploi page 22

EN
22
Manual control for variable speed
In this setting the speed can be adjusted manually.
1. Move the knob to the position
knob down to start the function. If you press
the knob again, the function will stop.
2. The speed can be adjusted using the control
bar.
3. The manual function can be used for all
accessories.
Pulse control
1. Move the knob to the position
2. As soon as you release the knob, the operation will stop.
3. This function can be used for all accessories.
Ice Crusher
1. Move the knob to the position
Press the knob again to stop the function.
2. This function is suitable for the blender.
Smoothies
1. Move the knob to the position
Press the knob again to stop the function.
2. This function is suitable for the blender.
Dough mixing
1. Move the knob to the position
Press the knob again to stop the function.
2. This function is suitable for the plastic blade.
Note: Due to different ingredients in the recipes you use, the performance of the
appliance may vary. You can also use the manual control
Chopping
1. Move the knob to the position
Press the knob again to stop the function.
2. This function is suitable for the stainless steel blade.
Note: Due to different ingredients in the recipes you use, the performance of the
appliance may vary. You can also use the manual control
. Press the
and press and hold the knob to start the function.
and press the knob down to start the function.
and press the knob down to start the function.
and press the knob down to start the function.
to get the best result.
and press the knob down to start the function.
to get the best result.