Fireplace Xtrordinair 864 See Through GS2 Manuel D'installation page 35

Epais d'installation de revêtement (pierre, brique, ou d'autres combustibles non plus de 25mm
d'épaisseur)
Si vous utilisez une cheminée Xtrordinair (FPX) face à cambrés, voir «Face à Faces épais avec un
Xtrordinair Cheminée arqué», page 35.
Do not install masonry (or other
material) in front of the
fireplace. This area must remain
open to install the face.
TOP VIEW - Protruding Masonry
Fireplace
TOP VIEW - Recessed Masonry
Fireplace
NOTE: The nailing brackets are not used for this type
of installation - secure the fireplace to the floor with
the brackets along the base of the fireplace.
© Travis Industries
Installation
(for qualified installers only)
Framing
Nailing Bracket
Drywall
Masonry
Framing
Drywall
(or cement board, etc.)
Masonry
1/18/2019 – 1404-FR
Floor-Mounted Fireplaces or Raised Hearths:
Build the hearth 1" (25mm) maximum above the
base of the fireplace. The fireplace may be
raised to accommodate thicker hearth materials.
Raised Fireplaces:
Masonry is installed 1" (25mm)
maximum above the base of the
fireplace.
FRONT VIEW
41"
1041mm
35
35-3/4"
908mm
1"
864 GS2 ST