Fujitsu LIFEBOOK AH532 Guide D'utilisation page 65

Figure 29. Removing the Memory Cover Screws
Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and into
5
the connector until it lodges under the retaining clip. You'll hear a click when it is properly in place.
Replace the cover and reinstall the screws.
6
Alignment Keys
Retaining Clips
Figure 31. Installing memory module
Figure 30. Removing the Memory Cover
Retaining Clip
Figure 32. Removing memory module
59 - Memory Upgrade Module
Retaining Clip