Activating The Wlan Device; Configuration Of The Wlan Device; Configuring The Wlan Using Windows - Fujitsu LIFEBOOK AH532 Guide D'utilisation

Activating the WLAN Device

Activation of the WLAN device can be accomplished using the same methods as the deactivation process
• Using the [Fn]+[F5] key combination
• In Windows, by right-clicking the WLAN icon then clicking "Connect to a network"

Configuration of the WLAN Device

The optional WLAN device can be configured to establish wireless network connectivity using the software that is built
into Windows. Support for most industry standard security solutions is contained in this software.Pre-defined
parameters will be required for this procedure. Please consult with your network administrator for these parameters:

Configuring the WLAN Using Windows

Click the Start button, then select Control Panel.
1
If the Control Panel is not in Classic View, select Classic View from the left panel. Double-click the Network and
2
Sharing Center icon.
Select "Manage wireless networks" from the left panel.
3
Click on the [Add] button.
4
Depending upon what type of connection you would like to make, make a selection. For an infrastructure network,
5
select "Manually create a network profile. For ad hoc network, select "Create an ad hoc network".
Enter the required information. You may need to consult with your network administrator for some information.
6
In the event you require assistance, go to the Network and Sharing Center window (Start -> Control Panel ->
7
Network and Sharing Center), and type in relevant keywords in the Search box.
Connecting to a Network
After you have configured your computer, you can connect to an active network by performing the following steps:
Click on the WLAN icon in the system tray.
1
Select "Connect to a network".
2
Select a network from the list that appears, and click the [Connect] button.
3
121 - Configuration of the WLAN Device