Replacing The Battery - Fujitsu LIFEBOOK AH532 Guide D'utilisation

Replacing the Battery

With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not charged.
There are two ways to swap batteries, cold-swapping and hot-swapping:
Cold-swapping Batteries
To cold-swap batteries in your battery bay follow these easy steps:
Have a charged battery ready to install.
1
Shut down your notebook and disconnect the AC adapter.
2
Turn the system over so the bottom is facing up, oriented as in Figure 22.
3
While pressing the battery lock (1), slide the battery bay release latch (2) to the right to unlatch it. Lift the battery
4
out of the bay (Figure 23).
Insert a new battery into the bay, and press it down so that the latches click into place.
5
Plug in the AC adapter and turn the power on.
6
Hot-swapping Batteries
To hot-swap batteries in your battery bay follow these easy steps:
B
E SURE TO PLUG IN AN
THE BATTERY IS BEING REPLACED
Plug an AC Adapter into the system and connect it to a power outlet.
1
Follow steps 3 and 4 in "Cold Swapping Batteries".
2
I L
F THE ITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED
AC A
DAPTER PRIOR TO REMOVING THE BATTERY
. I AC A
F YOU DO NOT USE AN
47 - Lithium ion Battery
. T
HERE IS NO BRIDGE BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE
DAPTER YOU WILL LOSE ANY UNSAVED FILES
,
YOU MAY NOT BE ABLE TO USE YOUR NOTEBOOK OR CHARGE YOUR BATTERY
.
.