Start And Operation - Klarstein EISZEIT CRUSH Mode D'emploi

START AND OPERATION

Step 1
Plug the power plug of the appliance into the wall socket.
Step 2
Add water as shown in Figure A or Figure B.
Sketch A - Add Water by Manual
Open the water reservoir door,and fill
directly,please be noted not over the
MAX line.
If the machine is in the ice cube making process and the refill water icon is
displayed, but you want to make more ice cubes, first remove the ice and refill a
cup of water to prevent the water tank from overflowing when the ice melts.
Sketch B - Connect Unit to Water
Faucet
EN
23