Control Panel - Klarstein EISZEIT CRUSH Mode D'emploi

EN

CONTROL PANEL

Error condition. Switch off the device and unplug the mains plug from
the socket. Restart the device. If the symbol reappears, contact your
service representative.
Ice container full.
There is too little water in the water tank. Refill with water.
The appliance is in ice dispensing mode.
Water is released.
Ice cube production. If an S is located on the upper right side of the
symbol, small ice cubes are produced. If there is an L on the lower right
side of the symbol, large ice cubes are produced.
Crushed ice is produced.
21