Key Functions; Installation Instructions - Klarstein EISZEIT CRUSH Mode D'emploi

EN
22

KEY FUNCTIONS

Key
WATER
SMALL/ LARGE
ON/OFF

INSTALLATION INSTRUCTIONS

• During transportation, the incline angle of the cabinet should not be over 45°.
Do not turn the Ice maker upside down. As this may damage the compressor
and sealed system.
• Remove all packing material and carefully check your ice maker to ensure it is
in good condition and that there is no damage to the ice maker or power cord
and plug.
• The Ice maker should be placed horizontally on a level surface. To ensure
proper ventilation for your Ice maker allow 150 mm of space at the top, the
back and on each side. Do not install the Ice maker near an oven, radiator, or
any other heat source.
• Before using the Ice maker for the first time, please wait 2 hours after
positioning it, and keep the front lid open for at least 2 hours.
• Ensure that the voltage indicated on the ice maker corresponds with the
voltage in your home.
• Pure water is not allowed to be used on this unit, spring water is
recommended.
• Please always keep the viewing window close during ice making.
Function
Press this button to obtain cold water. The ice function
must first be activated.
Press the small button to make small ice cubes and the
large button to make large ice cubes.
Press this button to turn the machine on or off.