Klarstein EISZEIT CRUSH Mode D'emploi page 25

Step 11
Press the ON/OFF button to turn off the unit.
Step 12
Press the WATER button to obtain water.
Note: If you wish to receive cold water, at least the ice making function should
be activated. Be sure to place your glass under the water outlet before pressing
the button, otherwise the water will splash everywhere.
Step 13
If you want to remove or replace the filling water line or insert the drain block,
proceed as follows:
First remove the blue ring (A) and then press the white ring (B) on the outside.
Remove the filling water pipe last.
EN
25