Hama EWS-840 Mode D'emploi page 10

Manually setting the date/time
Note – Time and time zone
• Press the mode button (16) repeatedly to change between the following different
displays:
Time with seconds display, time with weekday display, time adjusted according to time
zone with weekday display, time adjusted according to time zone with seconds display
• The time zone symbol (9) is displayed when the time has been adjusted according to
the the time zone.
• Press and hold the -button (14) for approx. 3 seconds to stop the search for the DCF
signal. The wireless symbol (8) goes out and you can set the time manually.
• Repeatedly press the mode button (16) until the time zone symbol (9) is no longer
displayed.
• Press and hold the mode button (16) for approx. 3 seconds to make the following settings
one after the other:
• Year (3)
• Month (5)
• Day (4)
• D/M – M/D (4/5) display
• 12/24 hour format (3)
• Hours (3)
• Minutes (3)
• Weekday (7)
• Time zone (3)
• Temperature unit °C/°F
• To select the individual values, press the -button (14) or the
each selection by pressing the MODE button (16).
• If you do not make an entry for 2 minutes, you automatically exit the setup mode.
-button (15) and confirm
9