Usage Methods - Qlima FFB 105 Manuel D'utilisation

• Be sure the table/floor you are placing this
• Installation only in a location which is pro-
• Convection air slots and rear ventilations
• Do not put any flammable items on top of
• This product can NOT be fixed to a wall of

USAGE METHODS

Assembly of the appliance
FFB 105
Parts List:
•
•
•
•
1.
2.
3.
4.
5.
6.
7.
FFB 830
Parts List:
•
•
•
•
•
•
•
4
22
appliance can bear its weight
tected against cross aeration / air draft
of the appliance shall nog be covered /
obstructed
the appliance
roof
(Fig.1)
Fireplace body
0.5L burner
Extinguish cover
Tempered glass
Unpack the fireplace and accessories. Check the content for completeness
and any damages incurred in transit. Keep children away from the packing.
Only install or place on a solid floor of non-flammable material
Remove all packaging and information material before assembly
Read warning sticker covering the burner, then remove the sticker
If something is broken or damaged: do not use the appliance. Return the
appliance to your store immediately.
Insert the glass into the intended slot (2x)
Place the burner into the burning chamber of the fireplace body.
(Fig.2)
Fireplace body
0.5L double-layer Burner
Control tool
Screws (5 x 30mm)
Tempered Glass
Screw (M6 x 10)
Screw cap
1x
1x
1x
2x
2x
1x
1x
4x
2x
6x
6x