Bosch GST 75 BE Professional Notice Originale page 19

OBJ_BUCH-171-004.book Page 19 Thursday, June 17, 2010 11:43 AM
Technical Data
Jigsaw
Article number
Stroke rate control
Stroke rate preselection
Orbital action
Rated power input
Output power
Stroke rate at no load n
0
Stroke
Cutting capacity, max.
– in wood
– in aluminium
– in non-alloy steel
Bevel cuts (left/right),
max.
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 84 dB(A);
Sound power level 95 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Cutting wood: Vibration emission value
2
a =5.5 m/s , uncertainty K=1.5 m/s
h
Cutting sheet metal: Vibration emission value
2
a =4 m/s , uncertainty K=1.5 m/s
h
Bosch Power Tools
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
GST 75 BE
may be used to compare one tool with another.
Professional
It may be used for a preliminary assessment of
3 601 E8E 0..
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
W 650
cantly increase the exposure level over the total
W 360
working period.
An estimation of the level of exposure to vibra-
-1
min 500–3100
tion should also take into account the times
mm 23
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
mm 90
nificantly reduce the exposure level over the to-
mm 20
tal working period.
mm 10
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
° 45
the hands warm, organisation of work patterns.
Declaration of Conformity
kg 2.3
We declare under our sole responsibility that
/ II
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 2006/42/EC.
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 10.05.2010
2
,
2
.
English | 19
Dr. Eckerhard Strötgen
Head of Product
Certification
1 609 929 W89 | (17.6.10)