Working In Self-Leveling Mode - Milwaukee HEAVY DUTY M12 3PL Notice Originale

WORKING IN SELF-LEVELING MODE

In self-leveling mode the laser will level itself in a ± 4° range and can project a horizontal
plane and two vertical planes.
1
Place the laser on a solid fl at
vibration free surface or on a
tripod.
2
Turn the rotation dial to: .
Laser mode indicator LED will display
Horizontal laser will be emitted.
3
The laser will generate 3 laser
planes.
(A) horizontal laser plane
(B) vertival laser plane side
(C) vertical laser plane front
(D) The laser will generate cross
planes when all planes are
activated.
ENGLISH
1/4" male thread
5/8" male thread
D
B
D
A
D
4
Choose the planes
that you want to
work with by
pushing buttons.
5
If the initial level of the
laser is beyond ±4° and
the self-leveling mode is
activated, the laser
C
beams will fl ash
.
In this case reposition the
laser.
6
Before moving the laser, turn the
rotation dial to:
This will lock the pendulum and
protect your laser.
> 4°
> 4°
.
8