Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
corp_U065-7474-B-DIVALI-VERRE-PREMIUM Page 42
2.2.1 - Switching the appliance on / off
Important note: At the first heating, a slight odor may appear
corresponding to the evacuation of any traces related to the
manufacture of the heating radiator.
2.2.1.1 - Setting the time and date
The first time you switch the radiator on, select the language and
enter the date and time.
The first time the radiator is switched on,
- AUTO mode is selected,
- the setpoint temperature is set at 19° C.
2.3 - Quick temperature setting
Langue
English
To modify the setpoint temperature, use
Use the consumption indicator to optimise your setting. When
the consumption indicator is at the green symbol, you
are at a temperature level lower than or equal to the
recommended temperature.
It takes at least 6 hours for the temperature to stabilise in the room.
Depending on your installation, you may note a different temperature
to the one displayed on your appliance. In this case, refer to the
"Calibration" chapter.
2.4 - Operating mode selection
2 operating modes are proposed:
- BASIC: Access to temperature setting only.
- PROG: Manual function programming
Before you do anything, wake up the screen by pressing the
key.
Select the mode which is best suited to your needs.
42
Black
Langue
31
English
Cancel
Validation
Date/Time
PROG
May
2018
15:26
Lun
or
.
19
0°
.
12:14
Publicité
Chapitres
Table des Matières
