Publicité
Les langues disponibles
Les langues disponibles
Setting Up Your Vicks 4600 Humidifier
Step 1
1. Remove from box. Remove packaging material. Set aside instruction manual.
Recycle packaging materials or save for storage.
2. Remove twist tie from power cord and extend power cord full length.
DO NOT OPERATE WITH POWER CORD COILED OR TWIST TIE IN PLACE.
3. Select a firm, level location at least 6" (15cm) from any walls. Place the humidifier on a
water-resistant surface. Mist should be directed away from any walls, bedding or furniture.
Kaz will not accept responsibility for property damage caused by water spillage.
Filling / Refilling
NOTE: TANK SHOULD BE CARRIED USING TWO HANDS. ONE HAND USING CARRYING HANDLE LOCATED ON TANK
TOP AND OTHER HAND SHOULD SUPPORT THE BASE OF THE TANK.
Step 1
1. Remove tank by grasping handle and pulling up. Remove tank cap located on bottom of tank.
2. Fill tank with cool water. Do not fill with warm or hot water.
3. Replace tank cap by firmly turning back in place. Place tank back on humidifier base.
Step 2
Step 2
Step 3
Step 3
5
Publicité
