Listening To A Bluetooth Device - Yamaha ISX-803 Mode D'emploi

Easy pairing
For the smartphone with NFC (Near Field Communication) function, you can easily perform the pairing operation just by holding the
smartphone over the NFC mark (you need to turn the system on and turn on the NFC function of the smartphone beforehand).
NFC
mark

Listening to a Bluetooth device

Top panel
AUTO 2 SET
1
DIMMER
USB LABEL SIDE
VOLUME SOURCE ALARM SNOOZE SLEEP
1
2 BEEP SOURCE + BEEP
1 SOURCE
CLOCK ALARM TYPE
PRESET
LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE
1
Press to turn the system on.
2
Hold the smartphone over the NFC mark.
3
Perform the pairing operation at the smartphone
(for details, please read the owner's manual of the
smartphone).
This unit is indicated as "ISX-803 Yamaha" on the
smartphone.
y
• If you are prompted for a passkey, enter the numerals "0000".
• If the connection fails, move the smartphone slowly on the NFC
mark.
• If the smartphone is equipped with a case, remove the case.
1
Press the SOURCE button to switch the playback
source to Bluetooth.
Using the remote control
Press Bluetooth.
2
Connect this unit and your connecting device via
Bluetooth.
3
Play back music from your Bluetooth device.
Note
Take care that the volume setting of this unit is not too high. We
recommend that you adjust the volume on the connecting device.
y
• If you connect via Bluetooth from your connecting device and play
back music while the system is in standby mode, the system will
automatically turn on.
• If you disconnect the Bluetooth connection from your connecting
device while the playback source is set to Bluetooth, the system will
automatically enter standby mode.
• If Bluetooth is selected as the playback source, the system will
automatically enter standby mode when 20 minutes have elapsed
without any Bluetooth connection nor any operation performed.
11
En