Replacing An Ink Tank - Canon PIXMA MP520 Guide De Démarrage Rapide

Replacing an Ink Tank

When ink tanks run out of ink, replace them using the following steps.
1
Open the Front Tray.
2
Make sure that the machine is turned on, and
lift the Scanning Unit (Printer Cover), then pull
the Scanning Unit Support (A) down into
place.
Caution
Do not hold the Print Head Holder to stop or move
it.
Do not touch the metallic parts inside the machine.
3
Push the tab (B) of the ink tank whose
lamp is flashing fast and remove it.
Do not touch the Print Head Lock Lever (C).
4
Remove the new ink tank from its packaging,
then pull the orange tape (D) in the direction
of the arrow to peel off the protective film.
Then remove the film (F) completely.
Important
Make sure that the protective film does not remain on
the air hole (E). If the air hole is blocked with the
remaining film, ink may leak out or may not eject
properly.
(A)
(C) (B)
(F)
Replacing an Ink Tank
(D)
(E)
31