i-tec USB-C Metal Nano Docking Station Triple Display + PD Mode D'emploi page 9

CONNECTING A HDMI / DISPLAYPORT MONITOR
The docking station is equipped with 2x DisplayPort and 1x HDMI ports
for connecting external monitors, projectors or TVs with DisplayPort /
HDMI interface. The graphics chip which is the "heart" of the docking
station supports up to 1x 4K 3840x2160 resolution @60Hz. Use a high-
quality DisplayPort / HDMI cable to connect the monitor to the docking
station.
CONNECTING TO THE LAN
You can use the GLAN RJ-45 port for connecting the Ethernet to a router/
switch and to the internet, it supports speeds of 10 / 100 / 1000 Mbps.
CONNECTING USB DEVICES
You can use USB 3.0 ports for connecting your keyboard, mouse, external
hard drive, printer and other devices or you can use it for connecting a
USB HUB, which will give you more free USB ports.
CHARGING
The docking station supports charging of USB mobile devices, such as
smart phones, e-book readers, multimedia players, navigation devices,
and tablets. Simply connect the device that you want to charge using the
original cable to the USB port of the docking station. If the device is not
charging, connect an original or universal USB-C power adapter to the
USB-C Power Delivery port on the docking station.
CHARGING THROUGH POWER DELIVERY
The docking station allows USB-C Power Delivery which is designed for
powering the connected "mother" device using an original or universal
mains power adapter with a USB-C connector.
Important: Disconnecting the USB-C adapter will restart the docking
station and will disconnect and reconnect all connected devices.
Fully compatible devices / systems (Alt Mode & Power Delivery)
USB-C is a new standard with a wide variety of uses, and compatibility
information is complex. Some USB-C devices / systems support Alt
Mode video output, while others do not. Some can be powered and
charged via USB-C Power Delivery, while others cannot.
Quick Start Quick Start
| 9
ENGLISH