Pocket Transmitter (Moving One-Txb); Controls And Functions - dB Technologies moving one B - 823-832 MHZ B6 UHF Mode D'emploi

ENGLISH
Customization of the transmitter
Five interchangeable plugs are provided for the
customization of a transmitter in the case of
simultaneous use
microphone setup)
For replacement
- Apply pressure to the sides of the plug (Figure A)
and pull it completely off from the plastic body
(Figure B)
- Match the shape of the desired plug with that of the
body (Figure C)
- Firmly press up to complete insertion (Figure D)
4.

POCKET TRANSMITTER (MOVING ONE-TXB)

The transmitter can operate with a maximum of 77 channels, depending on the operating band,
divided in 10 groups in the UHF band.
Channel change takes place via the infrared communication from the receiver.
The system is equipped with a microphone with ergonomic headset and dual coupling with
"Beyerdynamic" condenser capsule.
The transmitter generates a phantom supply power of 6Vdc on the microphone input connector
that supplies the various optional accessories (lavalier microphone or headset microphone
different from that supplied)
It is equipped with a clip for fixing to belt.
ATTENTION
Do not set more than one transmitter on a single channel to avoid transmission
interferences.
In the event of multiple microphone setup, use the channels within the same group

4.1. Controls and functions

23
of multiple systems
MOVING-ONE Diversity wireless microphone system
(Multiple