Uploading Images; Preparation - Nikon WT-1 Mode D'emploi

Uploading Images

Preparation

1
Insert the memory card containing the pictures to
be sent.
2
Turn the camera on.
3
Adjust network settings (
4
Select On for the Wireless LAN > Transceiver
option in the camera setup menu (
5
Select Status from the Wireless LAN menu and
confi rm that "Connected" is shown for "Status"
( 11). For information on what to do if the
camera shows "Not connected" or "Failure," see
"Troubleshooting" (
6
16–25).
12).
34).
Reverse
2
side
1
SET UP
ON
Voice memo protect
Voice memo button
Audio output
USB
Dust Off ref photo
Battery Info
Wireless LAN
Firmware Version
SET UP
Wireless LAN
Transceiver
OFF
Off
ON
On
SET UP
Wireless LAN
Status Connected
Link quality
Signal level
Now sending
Remaining 0 Frames
Time left 0 s
M
OK