Confi Guring The Wireless Lan Adapter - Nikon WT-1 Mode D'emploi

Confi guring the Wireless LAN Adapter
The minimum information needed to confi gure a wireless LAN adapter is
listed below. Contact the manufacturer for details.
Wireless mode
SS-ID
Encryption (WEP)
"Any" connection
Channel
IP address
Default gateway
MAC address
1
Same SS-ID must be assigned to WT-1.
2
Not required if adapter does support "any" connection.
3
In this example, it is assumed that network uses class C private IP addresses and
subnet masks. Be sure that IP address is not same as that assigned to ftp server or
WT-1. For example, if ftp server is 192.168.1.3, wireless LAN adapter can be assigned
192.168.1.1, and WT-1 can be assigned 192.168.1.2. All addresses must be in same
class.
4
If MAC address is required, enter MAC address for WT-1 (
802.11b
1 D2H
Off
2 Disabled
Any
3
Obtain IP address automatically: Off
IP address: 192.168.1.1
Subnet mask: 255.255.255.000
000.000.000.000
DNS 000.000.000.000
4
Unspecifi ed
21).
29