Uploading Pictures - Nikon WT-1 Mode D'emploi

FTP
PASV mode
1
Enter address assigned ftp server (
2
Choose "/" to upload to root directory on ftp server (

Uploading Pictures

This section describes how to upload pictures as they are taken. For best re-
sults, the WT-1 and wireless LAN adapter should be within a few meters with
no obstacles between them.
1
Select On for the Wireless LAN > Transceiver
option in the camera setup menu.
2
Confi rm that a connection has been established.
To check the connection from the camera, se-
lect Status from the Wireless LAN menu and
confi rm that "Connected" is displayed next to
"Status." For information on what to do if the
camera shows "Not connected" or "Failure," see
"Troubleshooting" (
Server Address: 192.168.1.3
Folder: / 2
User User ID: anonymous
Password:
Proxy Disabled
Disabled
34).
1
27).
28).
SET UP
Wireless LAN
Transceiver
OFF
Off
ON On
SET UP
Wireless LAN
Status Connected
Link quality
Signal level
Now sending
Remaining 0 Frames
Time left 0 s
OK
31