Troubleshooting - Nikon WT-1 Mode D'emploi

Troubleshooting

Problem
"POWER" LED does not light.
All LEDs blink at once.
Excessive radio interference.
Connection status shows "Not con-
nected" or "Failure," or ftp server
does not list connection.
34
Solution
• Turn camera on.
• Press shutter-release button halfway
to activate exposure meters.
• Reattach WT-1.
WT-1 hardware error.
Nikon-authorized service represen-
tative.
Change orientation of camera or an-
tenna.
Turn transceiver off and check settings
for WT-1, wireless LAN adapter or ac-
cess point, and ftp server.
4
—
4
Contact a
—
—
26