Step 2-Select Ptp; Uploading Images: Ftp Mode - Nikon WT-2 Mode D'emploi

Step 2—Select PTP
The camera must be in PTP mode to communicate with the WT-2.
1
Turn the camera on.
2
Set the USB option in the camera setup menu to
PTP.
The Wireless LAN option in the camera setup
menu will now be available. See "Menu Guide"
( 24) for details.

Uploading Images: ftp Mode

In ftp mode, photographs can be uploaded to an ftp server over a wireless
network. The principal steps involved in connecting to an ftp server for the
fi rst time are as follows:
1—Adjusting Settings ...........................................
2—Connecting to the Server....................................
3—Uploading Images .......................................
Step 1 can be omitted once the WT-2 has been set up for connection to a
particular server.
Firewalls
ftp mode uses TCP ports 20 and 21. It may be necessary to adjust fi rewall settings
before connecting to a server behind a fi rewall.
6–8
9
10–11
5