Nikon WT-2 Mode D'emploi page 23

5
Press the button.
SS-ID
If prompted for an SS-ID, press the multi selector to the
right and enter the connection SS-ID as described on
page 26.
Encryption Key
If prompted for an encryption key, press the multi se-
lector to the right and enter a key as described on page
27.
6
If the network is confi gured to supply an IP ad-
dress automatically by DHCP server or Auto IP (
51), press the multi selector to the right to select
Obtain automatically. If the network requires a
fi xed IP address or subnet mask, enter the infor-
mation supplied by the network administrator (
28). Press the
7
The dialog shown at right is displayed when setup
is complete. Press the
and return to the wireless LAN menu.
Errors
If an error is displayed, press the multi selector to the left and enter a valid setting. A
"WIRELESS ERROR" or "TCP / IP ERROR" indicates that the associated options are set
incorrectly. After checking settings for the host or access point, press the
restart the Connection Wizard and adjust camera settings to match.
Related Settings
To access advanced settings when entering data in steps 5–6, press the
related section of the network settings menu will be displayed (
16
button to proceed to Step 7.
button to exit the wizard
button to
button. The
26–31).