Connecting To The Computer - Nikon WT-2 Mode D'emploi

Connecting to the Computer

1
Turn on a computer that has been paired with the camera (
for it to start up.
2
Turn the camera on.
3
Select PTP / IP for the Wireless LAN > Mode op-
tion in the camera setup menu (
4
Select On for Wireless LAN > Wireless LAN sys-
tem ( 24).
5
Confi rm that "Now in PTP / IP mode / Waiting for
connection" is displayed in the top level of the
wireless LAN menu. For information on what to
do if an error is displayed, see "Troubleshooting"
( 50).
6
The connection is complete when the message,
"Connected to (computer name)," is displayed in
the pairing options menu. If the camera continues
to display the "waiting for connection" message,
repeat the steps described in "Pairing" (
20
24).
17).
17) and wait