Kohler K-3398 Mode D'emploi page 14

Replace the Trip Button (cont.)
Use the following steps to install the trip button on the toilet:
NOTE: The trip button must be aligned before it can be reinstalled.
Align the button to the correct orientation at the hole in the tank.
Push the button gently into the tank until it snaps into place.
NOTE: The plug operates just like a modular telephone plug.
Align the tank wiring modular plug into the modular jack of the
trip button and snap it into place.
Ensure that the trip button wiring is supported above the water
level.
Replace the cover on the tank.
Insert the electrical plug for the toilet into the receptacle.
Test the toilet for proper operation.
1013091-5-B 14 Kohler Co.