Hood Lamp; Carbon Filter; Troubleshooting - Beko BHCA66641BFBHS Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

c. Reinstall the aluminium filter in its slot
after flushing by following the above
steps in reverse.

5.3 Hood Lamp

In the event of a lamp malfunction in the
hood, contact your local dealer or the Cus-
tomer Service, and ensure that the lamp is
replaced.
5.4 Carbon Filter (Usage without a
flue)
General warnings
• If you have installed your product without a
flue, you should replace your carbon filters
every 4 months in normal use. You can
obtain the carbon filter from Authorized
Services.
• The carbon filter should never be washed.
• If you do not follow the rules for cleaning
and replacing the filters of your hood, you
may cause a fire.

6 Troubleshooting

If the problem persists after following the in-
structions in this section, contact your
vendor or an Authorized Service. Never try to
repair your product yourself.
Product is not working.
• Fuse may be faulty or blown. >>> Check
the fuses in the fuse box. Change them if
necessary or reactivate them.
• The product may not be plugged in. >>>
Check if the product is plugged in to the
outlet or not.
• The speed button may not be set. >>>
Press/touch the desired speed button.
Removing carbon filters
a. Open the glass cover of the hood and re-
move the aluminium filter.
b. Unscrew the carbon filters on the right
and left of the motor holder.
c. Place the lug slots of your new carbon fil-
ters into the lugs on the motor holder and
turn them clockwise to snap them into
place.
d. Close the hood glass cover after installing
the aluminium filter.
• No electricity. >>> Ensure the mains is op-
erational and check the fuses in the fuse
box. Change the fuses if necessary or re-
activate them.
Hood light is not on.
• Hood lamp may be faulty. >>> Contact
your local dealer where you purchased
your product or the Customer Service,
and ensure that the lamp is replaced.
• No electricity. >>> Ensure the mains is op-
erational and check the fuses in the fuse
box. Change the fuses if necessary or re-
activate them.
EN / 17
EN
PL
FR

Publicité

Table des Matières

Dépannage

loading

Table des Matières