JVC KD-R841BT Manuel D'instructions page 13

Hands-free menu operations
1
Press .
2
Turn the volume knob to make a selection (see the following table), then
press the knob.
Repeat step 2 until the desired item is selected.
• To return to the previous hierarchy, press G T/P.
• To cancel, press MENU.
RECENT CALL
1 Turn the volume knob to select a name or a phone number.
• ">" indicates call received, "<" indicates call made, "M" indicates call
missed.
• "NO HISTORY" appears if there is no recorded call history.
2 Press the volume knob to call.
PHONEBOOK 1 Turn the volume knob to select a name, then press the knob.
2 Turn the volume knob to select a phone number, then press the knob to call.
• If the phonebook contains many numbers, you can fast search for the
desired number by turning the control dial quickly, or use Character Search.
(➜ 11)
• "NO DATA" appears if no entries are found in the Bluetooth device's
phonebook.
• "SEND P.BOOK MANUALLY" appears if [P.BOOK SEL] is set to
[PB IN UNIT] or the phone does not support PBAP.
DIAL NUMBER
1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).
2 Press E / F to move the entry position.
Repeat steps 1 and 2 until you finish entering the phone number.
3 Press the volume knob to call.
VOICE
Activate Voice Recognition of this phone. (➜ 12)
SETTINGS
P.BOOK SEL *
PB IN PHONE: The unit browses the phonebook of the connected phone. ;
PB IN UNIT: The unit browses the phonebook registered in the unit. (You can
copy the phonebook memory using [P.BOOK WAIT]). (➜ 13)
AUTO ANSWER 03 SEC / 05 SEC / 10 SEC: The unit answers incoming calls automatically in
3 / 5 / 10 seconds. ; OFF: Cancels.
RING TONE IN UNIT: The unit rings to notify you when a call/text message comes in.
(Default ring tone is different according to the paired device.)
• CALL: Select your preferred ring tone (TONE 1 — 5) for incoming calls.
• MESSAGE: Select your preferred ring tone (TONE 1 — 5) for incoming text
messages. ;
IN PHONE: The unit uses the connected phones' ring tone to notify you when
a call/text message comes in. (The connected phone will ring if it does not
support this feature.)
RING COLOR KD-R841BT:
COLOR 01 — COLOR 29 (COLOR 06): Display zone will change to the
selected color during a call or when a text message comes in. ; Off : Cancels.
ECHO CANCEL 01 — 10 (04): Adjust the echo cancellation delay time until the least echo is
being heard during a phone conversation.
MIC LEVEL 01 — 03 (02): The sensitivity of the microphone increases as the number
increased.
ON: The unit rings and "RCV MESSAGE" ] [Device Name] appears to notify
MSG NOTICE
you of an incoming text message. ; OFF: Cancels.
* Selectable only when the connected phone supports PBAP.
Character search
You can search through the contacts quickly according to the first character (A to Z,
0 to 9, and OTHERS).
• "OTHERS" appear if the first character is other than A to Z, 0 to 9.
1
Press .
2
Turn the volume knob to select [PHONEBOOK], then press the knob.
Press 1 ∞ / 2 5 to select the desired character.
3
4
Turn the volume knob to select the desired contact, then press the knob to call.
11
BLUETOOTH®
Default: XX
ENGLISH