Vacuuming Of Liquids; Maintenance And Repairs - Nilfisk VHO200 Manuel D'instructions

VHO200

Vacuuming of liquids

Comply with the safety regulations governing the
materials for which the vacuum cleaner is used.
■ Before vacuuming, check that the float is present.
■ If foam forms, turn off the vacuum cleaner
immediately and empty the container.
■ Warning: switch off the vacuum cleaner
immediately if foam or liquid leaks out.
■ Warning: the dirty liquid collected by the vacuum
cleaner must be considered conductive.
Do not use the vacuum cleaner without the float!
If it's used without the float, the vacuum cleaner may
be seriously damaged.

Maintenance and repairs

Disconnect the vacuum cleaner from its power
source before cleaning, servicing, replacing parts or
converting it to obtain another version/variant. The
plug must be removed from the socket.
■ Carry out only the maintenance operations
described in this manual.
■ Use only original spare parts.
■ Do not modify the vacuum cleaner in any way.
Failure to comply with these instructions could
jeopardize your safety. Moreover, such action would
immediately void the EC declaration of conformity
issued with the device.
To carry out maintenance operations which are not
described in this manual contact the manufacturer's
Service Center or our sales network.
US
01/2014
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
6