Publicité
WARNING
RISK OF EXPLOSIVE GAS MIXTURE. READ THE USER MANUAL BEFORE USING THE CHARGER.
DANGER
RISK OF ELECTRIC SHOCK. DO NOT TOUCH UNINSULATED PORTION OF OUTPUT CONNECTOR OR
UNISULATED BATTERY TERMINAL.
CAUTION
DO NOT EXPOSE TO RAIN.
CHARGE ONLY LEAD/ACID BATTERIES. OTHER TYPE OF BATTERIES MAY BURST CAUSING PERSONAL INJURY
AND DAMMAGE.
DISCONNECT MAIN A.C. SUPPLY BEFORE CHANGING FUSES.
TO REDUCE THE RISK OF FIRE, USE ONLY ON CIRCUITS WITH ADQUATE CIRCUIT PROTECTION* IN
ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE (ANSI/NFPA70). INSTALL THE BATTERY CHARGER ON
A SURFACE OF NON-COMBUSTIBLE MATERIAL SUCH AS STONE, BRICK, CONCRETE OR METAL.
USE COPPER CONDUCTOR ONLY FOR AC INPUT WIRING.
* >>> TO ENSURE PROPER OPERATION ON THE CHARGER AND A.C. INPUT PROTECTION CIRCUIT, IT'S
RECOMMENDED TO SELECT PROTECTIVE DEVICES SUCH AS FUSES OR CIRCUIT BREAKERS HAVING A CURRENT
RATING OF 110-150% OF THE MAXIMUM CURRENT DRAWN BY THE CHARGER (REFER TO INPUT SPECS ON THE
NAMEPLATE). FOR CHARGERS HAVING MULTIVOLTAGE INPUT, CONSIDER THE CURRENT DRAW OF
CORRESPONDANT TO THE INPUT VOLTAGE THAT IS BEING USED.
IF STANDARD FUSES OR CIRCUIT BREAKERS RATED WITHIN THE 110-150% OF AC CURRENT DRAW AREN'T
AVAILABLE, SELECT THE NEXT HIGHER RATING AVAILABLE.
www.tecnikchargers.com
Publicité
