Checchi & Magli WOLF PRO Manuel D'utilisation Et D'entretien page 52

Lifting the WOLF PRO work vehicle
WARNING
During lifting watch out for the load swinging, as
the hook-up point is never perfectly at the centre of
gravity.
Lifting operations must be carried out using suitable
means for the load to be lifted, by qualified and author-
ised personnel in order to safeguard their own safety and
that of the other people involved in the operations.
D
UN41-0780NQ
Proceed as outlined below.
1) Use the specific tool (A) provided with the work vehi-
cle for lifting.
2) Strap up the work vehicle as shown in the figure.
Lifting the WOLF COMPACT work vehicle
WARNING
During lifting watch out for the load swinging, as
the hook-up point is never perfectly at the centre of
gravity.
Lifting operations must be carried out using suitable
means for the load to be lifted, by qualified and author-
ised personnel in order to safeguard their own safety
English language
INFORMATION CONCERNING HANDLING AND INSTALLATION
A
The illustration shows the hook-up points for lifting the
work unit with two planting units fitted.
The lifting hook-up points are the same for all work units
(see "Technical information").
For models WOLF PRO/1, WOLF PRO/3, WOLF PRO/5, the
seat must be removed to allow the lifting means to be
fitted.
3) Check that the pin (B) is secured by the lock pin (C)
and that the chains are fastened stably to the frame
(D).
and that of the other people involved in the operations.
The illustration shows the hook-up points for lifting the
work unit with two planting units fitted.
The lifting hook-up points are the same for all work units
(see "Technical information").
14
4
D
Use and maintenance